Before you head out
On this page:
1. Get familiar with the area
Make sure you get local knowledge about hazards.
Every region in New Zealand has local variations in the environment and water conditions. Make sure you have the latest scale chart of any area where you go boating. Charts show things such as water depth, rocks above and below the water, underwater cables, tidal flows, buoys, beacons, lighthouses and the coastline.
2. Check the conditions
Make sure you are up-to-date with the marine weather forecast and tides for your boating area.
Marine forecasts are good at predicting major weather events, e.g. gales, but they may be less accurate when predicting changes in local conditions. Be sure to seek local information and knowledge and be prepared for the unexpected.
If you are in doubt, change your plans and don’t go out.
4. Stow your gear onboard
Have you got the right safety gear on-board?
5. Plan your boat launch
When you arrive at the boat ramp, park well out of the way of other boats as you prepare to launch your boat.
Watch out for overhead wires. It is extremely dangerous to pass under one if your vessel’s total height exceeds the ‘SAFE CLEARANCE’ given to your boating area. Electrical arcing and burns can occur from contact with powerlines.
As you prepare to enter the water:
- put in bungs and check that they are secure
- check that your safety gear is abroad
- check that you have enough fuel
- brief your crew and passengers - make sure everyone knows how to find and work the safety equipment stowed onboard
Slowly move away from the ramp, while keeping a good lookout - remember the 5 knot rule.